Versilon™ Clamp Fitting, Style 10, 10U

Versilon™ Clamp Fitting, Style 10, 10U from Saint-Gobain includes jump (or step-up) styles designed with “blended” internal surfaces to prevent material build-up or entrapment. The internal surface is chamfered to prevent material build-up or entrapment at end-point where the fitting stem contacts the Chemfluor® fluoropolymer inner tube.

Materials
• 316L stainless steel

Surface Finish
• Average 15 Ra or better
• For applications requiring even smoother material surfaces, fittings electropolished to 10 Ra can be supplied

Technical Data
• Temperature/pressure ratings
     • Pressure and temperature ratings are dependent on clamp pressure ratings and gasket material temperature ratings
• Clamps
     • Standard weight style: 150 PSIG @ 70°F (21°C); 125 PSIG @ 250°F (121°C)
     • Heavyweight style: 500 PSIG @ 70°F (21°C); 125 PSIG @ 250°F (121°C)
     • High pressure bolt style: 1500 PSIG @ 70°F (21°C); 125 PSIG @ 250°F (121°C)
• Gaskets
     • Above 250°F (121°C), PTFE, Viton® or silicone gaskets are recommended

Specifications

Inner Diameter in (mm)
0.19 (4.83)
0.28 (7.11)
0.38 (9.65)
0.38 (9.65)
0.65 (16.51)
0.65 (16.51)
0.87 (22.1)
0.87 (22.1)
1.37 (34.8)
1.37 (34.8)
1.75 (44.45)
2.22 (56.39)
2.8 (71.12)
3.75 (95.25)

Characteristics

Regulation
  • BPE

Related Documents

Download Selected (0)
Guide: Versilon™ Fluoropolymer Hose and Fitting Selection
PDF | 8 pages | 2.51 MB
Guide: Versilon™ Fluoropolymer Hose and Fitting Selection
Guide: Versilon™ Rubber, Silicone & PVC Hose and Fitting Selection
PDF | 8 pages | 2.17 MB
Guide: Versilon™ Rubber, Silicone & PVC Hose and Fitting Selection